MIBs for Ubiquiti radios

Moderator: doc_aka_rich

admin
Site Admin
Posts: 2
Joined: Mon Apr 20, 2015 12:31 am

MIBs for Ubiquiti radios

Postby admin » Thu May 07, 2015 6:06 pm

Ubiquiti radios support standard MIB-II, 802dot11, their own enterprise MIBs, and MIBs from Mikrotik and Frogfoot.

NOTE: The Frogfoot mib replicates the well known "system" mibname from MIB-II. In my version I renamed the frogfoot "system" with "Fsystem". Download my frogfoot-resources-mib and you get it already renamed.

NOTE: The Ubiquiti radios support a newer version of the standard MIB-II definitions than I generally use. As such I do not load my MIB-II definition file (that comes pre-loaded with ScanEngine Explorer). The Ubiquiti supplied SNMPv2-MIB and IF-MIB files take their place.

Here's the MIB files I load in this order:
UBNT-SNMPv2-SMI
UBNT-SNMPv2-MIB
UBNT-IF-MIB DEFINITIONS
UBNT-IEEE802dot11-MIB
MIKROTIK-MIB
UBNT-FROGFOOT-RESOURCES-MIB

The only root that needs to be defined in the roots panel is "iso 1"
Attachments
UBNT-FROGFOOT-RESOURCES-MIB.mib
(9.13 KiB) Downloaded 521 times
MIKROTIK-MIB.mib
(58.37 KiB) Downloaded 353 times
UBNT-IEEE802dot11-MIB.mib
(90.75 KiB) Downloaded 392 times
UBNT-IF-MIB DEFINITIONS.mib
(71.84 KiB) Downloaded 387 times
UBNT-SNMPv2-MIB.mib
(29.47 KiB) Downloaded 528 times
UBNT-SNMPv2-SMI.mib
(1.14 KiB) Downloaded 377 times

Return to “SNMP MIBs”

Who is online

Users browsing this forum: No registered users and 1 guest